Bevelling machine CHP 21 G REV

Wider optimization of welding preparation process

The definitive answer for all your beveling needs

You are here

CEVISA CEVISA CHP 21 G REV

The beveling machine CHP 21 G REV combines2 machines in 1, CHP 21 G & CHP 21 G INV.

In less than 1 minute, you can turn it over to bevel in a standard or upside down position depending on your beveling requirements. Thanks to its design, you can bevel edges in X, Y, K or V in a very short time without any intermediary or dangerous work turning plates.

This high performing and flexible CHP 21 G REV beveling machine will meet all your demandsfor ergonomic and intensive work. It is easy to use thanks to its simple set-up, self-feed chamfering, quick change position and bevel speed.

Optimum Productive Flexibility guaranteed for wider optimization of welding preparation process&quick return on investment.

Benefits of reversible shearing cutting bevelling machine CHP 21 G REV

  • Efficiency: 2 in 1 for upside-down bevels without turning any plates
  • Flexibility: adapted for any kind of heavy chamfer work
  • Optimization: self-feed and high speed 1.7m/min
Data sheet
1.0Mb
Bevelling machine CHP 21 G REV
Technical details
Performances
  • Maximum bevel in one run: 20 mm*
  • Maximum bevel recommended in several runs: 28 mm*
  • Maximum recommended thickness: plates and tubes up to 40 mm
  • Nominal thickness: plates and tubes from 9 mm to 50 mm
  • Angle variation: from 20° to 45°
  • Plate beveling: width min. 70 mm
  • Tube bevelling: Ø min. int.100 mm
  • Disc bevelling: Ø min. 350 mm

* Dimensions calculated on 400 Mpa steel, bevel length.

Specifications

Motor: three-phase
Motor power: 4 CV – 3 kW

Voltage:

  • 220/380 V. 50 Hz.
  • 250/440 V. 60 Hz.
  • For other voltages, please consult us

Electric box with:

  • Emergency stop button
  • Thermomagnetic switch trip

Switcher
Net weight: 635 Kg
Works height: adjustable from 850 mm to 880 mm
Built-in trolley

Esquemas de chaflanados / biselados

Chaflanado de chapas: chaflán / bisel en K, V, X e Y
Chaflanado de tubos, en posición horizontal: chaflán/bisel en K, V, X e Y exterior o interior posibles (según diámetro).
Velocidad de biselado / achaflanado: 1,7 metros por minuto.

 

CEVISA's advantages
  • Efficiency: 2 in 1 for upside-down bevels without turning any plates
  • Flexibility: adapted for any kind of heavy chamfer work
  • Optimization: self-feed and high speed 1.7m/min
Accessories
Cevisa’s beveling machine is provided with:
  • 3 cutters for steel (1 on machine)
  • 1 set of spanners for the machine adjustment
Extras & consumables:
  • Universal cutter
  • Plastic rollers to avoid material marking